YAMA 1:5 SCALE GAS RC BUGGY 2.4GHZ - PRO 30CC CARBON VERSION

This is the brand new upgraded pro version of the Yama gas radio controlled buggy. This popular model has been upgraded to make it more powerful, perform better and finished off with a striking new body shell and colour scheme. We have two versions of the Yama Pro. This version has special tyres that perform particularly well on loose surfaces. If you are looking to drive on loose surfaces such as sand then this is the best choice.

$654.41

YAMA 1:5 SCALE GAS RC BUGGY 2.4GHZ - PRO 30CC CARBON VERSION

Categories , ,

Description

Upgrades Include:

  • Bigger more powerful 30cc engine
  • Colour coded aluminium shocks
  • Colour coded aluminium suspension arms
  • Carbon style strong PC body shell
  • Upgraded extra grippy tyres
  • Upgraded extra grippy tyres

Purchasing these upgrades individually would cost a lot more than the difference in price between the standard and pro version. Like the standard version, this gas RC car runs on a mix of normal unleaded gas and 2 stroke oil. Both are low cost and available from any gas station so running a gas RC car like this is cheap and convenient. The model comes fully built with everything needed to be racing in no time.

ADJUSTABLE WING

The angle of the wing can be changed to adjust the amount of downforce.

SOLID ALUMINIUM CHASSIS

Aluminium chassis with countersunk screws.

CENTRAL CHASSIS LAYOUT

Engine, fuel tank and battery are placed down the centre of the chassis to give good balance.

BIG 1:5 SCALE

The car measures 785mm x 310mm x 450mm.

UPGRADED BIGGER 30cc GAS ENGINE

The engine runs on normal unleaded gas mixed with normal 2-stroke oil, both available from gas stations. On this pro version a bigger more powerful engine is used.

TWIN REAR DISC BRAKE SYSTEM

Disc brakes give ultimate stopping power at high speeds.

RECHARGEABLE ELECTRONICS BATTERY PACK

The servos and radio receiver are powered by an included rechargeable battery pack so you do not need to keep replacing normal AA batteries like you do on other models.

 

LARGE SCALE STEERING SERVO

An extra large and strong steering servo is used to handle the extra power, speed and weight of the model.

ALL NEW 2.4GHz RADIO TRANSMITTER

All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows multiple RC cars to be used in the same area without interference.

ADJUSTABLE ALUMINIUM OIL-FILLED SHOCKS

Independent colour coded aluminium shocks on each wheel are connected to solid aluminium shock towers for increased strength.

SKU YBUGGYPROCARBON
Manufacturer AoWei
Model Scale 1:5
Build RTR
Drive 2WD
For Terrain Off Road
Radio Equipment 2.4 GHz
Type Buggy
Motor / Engine 30cc Petrol
Specifications
  • Length: 785mm
  • Width: 450mm
  • Height: 310mm
  • Servos—Steering : 18kgf.cm/22kgf.cm; Throttle: 6kgf.cm/9kgf.cm
  • Receiver(2.4G for racing ,Ni-Mh batteries 5×1.2v(2Channels)
  • RC Radio Distance: ≥200m
  • Scale: 1:5
  • Max Speed: 90km/h
  • Full function: Forward, Brake, Left & Right,
  • D/W: Rear 2WD Drive System
  • Brake: Twin ventilated Rear Disc Brake
  • Engine: single cylinder, two stroke, air-cooled, 30cc
  • Fuel: Gasoline Octane (93# or above) /+ Synthetic Oil (25:1 ratio)
  • Fuel Capacity: 0.5L
  • Start Method: Pull Start
  • Tire: 170X60mm(F) / 170X80mm(R)
  • Wheelbase (F/R): 520mm
  • Tread: 350mm(F) / 360mm( R )
  • Suspension Pitch: 6.5/8.5(F/R)
Features
  • Upgraded more powerful 30cc engine
  • Upgraded racing wheels and tyres
  • Upgraded PC body shell
  • Upgraded aluminium colour coded suspension arms
  • Colour coded aluminium shocks
  • High quality 2.4GHz radio set
Required To Use
  • A mix of normal unleaded petrol and 2 stroke oil (Both of these are available from any petrol station)
  • 8 x AA Batteries