DUNE BUGGY - 1/8 SCALE 2WD RC CAR WITH LED LIGHTS - BRUSHLESS VERSION

This is an upgraded version of the standard Dune Buggy. This upgraded radio controlled buggy comes with brushless setup including 3300KV brushless motor, 60A brushless ESC, 7.4V 2200mAh lithium polymer battery and 2.4Ghz radio equipment.

$261.97

DUNE BUGGY - 1/8 SCALE 2WD RC CAR WITH LED LIGHTS - BRUSHLESS VERSION

Categories , ,

Description

IMPORTANT – Please note the instructions and box of these models say they are 1/10th scale BUT they are actually 1/8th scale. If you check the dimensions you will see they are 1/8th scale and much bigger than 1/10th scale models. This is just a printing mistake and this can be verified by contacting the manufacturers directly.

This is an upgraded version of the standard Dune Buggy. You can see the standard version here.

This upgraded version comes with brushless setup including 3300KV brushless motor, 60A brushless ESC with fan assisted heat-sink and a 7.4V 2200mAh lithium polymer battery. The brushless setup gives a lot more power and speed as well as less maintenance of the motor. The Li-Po battery pack included is a big 7.4V 2200Mah which will give full power for longer compared to the standard Ni-MH version.

The radio equipment has also been upgraded to a wheel type 2.4GHz transmitter and receiver. The advantages are clear – no need for fiddling with crystals, range virtually as you can see, no interference from fellow drivers and the best of them all much more responsive precision steering!

The model comes fully assembled and ready to run so all you need is 4 x AAA batteries for the radio equipment.

LARGE MODEL

This RC car measures 476mm x 186mm x 290mm (length, height, width)

CENTRAL CHASSIS LAYOUT

A narrow chassis with battery and servo placed centrally to ensure perfect balance and performance.Chassis

 

POWERFUL 3300KV BRUSHLESS MOTOR

A fast brushless motor and 60A brushless ESC is much faster than a standard brushed motor.

MotorHIGH TORQUE STEERING SERVO WITH METAL GEARS

The steering servo is flat against the chassis to give a lower centre of gravity. It features metal gears to make it stronger.

Servo

INDEPENDENT FULLY ADJUSTABLE SUSPENSION

Both the angle and tension of the shocks can be adjusted. The front shock mounts lean back to give more front end suspension when jumping and using on extreme off road terrain.

LARGE GRIPPY REAR TYRES

Large rear tyres with thinner front tyres for high speed even when off road.

Tyres
WORKING LED HEADLIGHTS

Keep track of your car while driving at night.

Lights

ALL NEW 2.4GHz RADIO TRANSMITTER

All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference.

Transmitter
SKU A2033T-V2
Manufacturer Acme-Tech
Model Scale 1:8
Build RTR
Drive 2WD
For Terrain Off Road
Radio Equipment 2.4 GHz
Type Buggy
Motor / Engine Brushless
Specifications
  • Height: 186mm
  • Length: 476mm
  • Width: 290mm
  • Wheel base: 343mm
  • Gear Ratio: 10.86 : 1
  • Motor: brushless 3300KV
  • Battery: 7.4V 2200mAh Li-Po
  • Radio: 2.4GHz
Features
  • Upgraded 1/8 scale RC dune buggy
  • Powerful brushless 3300KV motor and brushless 60A ESC
  • LiPo Battery 7.4V 2200mAh with balance charger
  • 2.4GHz radio equipment
  • Large grippy rear tyres
  • Front tyres with directional pattern for better handling
  • Narrow chassis with central battery tray
  • Metal transmission and diff gears
  • High torque steering servo with metal gears
  • Realistic looking driver included
  • Adjustable slipper clutch
  • Working LED head lights
Required To Use
  • 4 x AAA Batteries