BULLET ELECTRIC BRUSHLESS RC BUGGY 2.4GHZ

The Bullet buggy is a high performance, high speed machine. With its unique design the Bullet RC buggy performs both on and off the tarmac. The 4WD system with front and rear differentials evenly distributes the massive power to the wheels making the Bullet a race winner. The special motor in this model is much quicker than the motors found in other models.

This fab model comes equipped with 2.4GHz radio equipment which means longer range and also no interference from fellow modelers!

$249.37

BULLET ELECTRIC BRUSHLESS RC BUGGY 2.4GHZ

Categories , ,

Description

Brushless motor systems are a new technology in electric remote control cars that until recently have only been available as upgrades for normal RC cars. This is because to have a brushless setup not only requires the brushless motor but also a brushless ESC, Li-polymer battery and special Li-polymer charger which are all very expensive and would cost hundreds of pounds. Then came some brushless 1:16 scale brushless electric models that due to their smaller size only needed a smaller brushless motor etc so could be priced at a realistic level AND NOW…We are pleased to introduce the full 1:10 scale Bullet brushless electric RC buggy. With a big brushless motor and 11.1V Li-Polymer battery these models are ridiculously quick and at an amazing price!

The electric Bullet buggy is a high performance, high speed machine. With its unique narrow chassis and sway bars fitted as standard the model performs both on and off the tarmac. The 4WD system with front and rear differentials evenly distributes the massive power to the wheels making the Bullet a race winner.

The special motor in this model is much quicker than the motors found in other models. Because it is brushless it also means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full advantage of that the standard 7.2v Ni-Mh batteries that are found in most RC car kits has been replaced with a very powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed for these special batteries. The brushless RC buggy comes fully built with everything you need to get racing apart from 4l AAA batteries for the radio handset. The radio equipment is the upgraded 2.4GHz which means that you will get longer range and experience no interference from fellow model racers! This is a high spec racing model that at full speed requires some real skill to control it. It is therefore recommended for ages 14+

A2011T-V1 Box
1:10th SCALE MODEL

This 1:10th scale buggy measures in at 390mm x 260mm x 140mm (length, width, height)

A2011T-V1 Dimensions
ALUMINIUM 4WD SHAFT DRIVE SYSTEM

This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better off road ability and better handling.

Above
HIGH SPEED BRUSHLESS MOTOR WITH FAN COOLED BRUSHLESS ESC

Brushless motors are much faster than normal ones making this model very fast. The speed controller has its own dedicated fan to keep it operating at peak temperature.

Motor
OIL FILLED SHOCKS WITH ALUMINIUM SHOCK TOWERS AND SWAY BARS

Both the tension and angle of the shocks can be adjusted to suit your driving preference and terrain. Sway bars are fitted as standard to further improve cornering ability.

A2011T-V1 Shocks
11.1v LITHIUM BATTERY

This model comes complete with a 11.1v lithium battery and charger. To get the most speed from a brushless motor a lipo battery should be used. The battery box size is adjustable so will fit most aftermarket batteries and even two batteries can be fitted.

Battery
SLEEK BODY SHELL

A pre-painted modern designed body shell with high downforce wing.

A2011T-V1 Body Shell
ALL NEW 2.4GHz RADIO TRANSMITTER

All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference.

Transmitter
ALUMINIUM CHASSIS

A solid blue aluminium chassis with countersunk screws.

SKU A2011T
Manufacturer Acme-Tech
Model Scale 1:10
Build RTR
Drive 4WD
For Terrain Off Road
Radio Equipment 2.4 GHz
Type Buggy
Motor / Engine Brushless
Specifications
  • Width: 260MM
  • Height: 140MM
  • Length: 390MM
  • Wheelbase: 280MM
  • Gear ratio: 8.95:1
  • Wheel diameter.: 80*30MM
  • Ground clearance: 25MM
  • Radio: 2.4GHz
  • Battery: 11.1V 1800mah Li-Polymer
  • Motor: Brushless 2400kv 3650 size
  • ESC: 60A Brushless
  • Scale: 1:10
Features
  • 1/10 Scale brushless powered car
  • 4WD Shaft drive system
  • Fully ball raced
  • High torque servo
  • Extreme power brushless motor
  • Oil-filled shocks
  • Powerful Li-Polymer battery with balanced charger
  • Front and rear bevel differentials
  • Brushless 60A ESC
  • Pre-painted exclusive body shell
  • 2.4GHz Radio equipment for longer range and interference free use.
Required To Use
  • 4 x AAA Batteries